Products

  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow


Wedge Wire Screen
Written by laktas   

Wedge Wire Screens are manufactured by Triangular wires rigidly welded to rods or flat bars to form a precise opening.These fabricated screens offer narrow opening with high strength which normal wire mesh screens cannot offer.

CONSTRUCTION
Wedge wire screen are offered in normal construction and inverted construction. The total thickness of the construction is calculated as follows.
T = Profile Wire Height +Support Height -(IMM) welding
penetration

Wedge Wire Screens are used as:
  • Liquid / Solids Separation
  • Solid Removal From Process Wastewater
  • Salt Water Intake Screens & Fiber Removal Screens
  • Cylinder for Rotary Screens
  • Recovering Solids & Pulps Thickening Applications
  • Heavy Media Recovery & Product Dewatering Screens
  • Sieve Bend Screens & In-line Strainers
  • Resin Traps & Pressure Screens
  • Strainers for Pumps or Compressor Protection
  • Support Grid For Uniform Fluid Collection In Filter
  • Hub & Header Lateral Screens Systems
  • Nozzles for Tube Sheets
  • Up flow Clarifiers; Gravity Filters Under Drain Systems
WEDGE WIRE SPECIFICATIONS
Number
Width mm
Height mm
Angle
Min. slot
Opening mm
Q – 30
0.75
1.30
13°
Minimum slot
opening @
±0.05MM
Q – 43
1.10
2.20
13°
Q – 63
1.52
2.54
13°
Q – 80
2.00
4.15
08°
Q – 90
2.26
3.53
13°
Q –109
2.82
4.45
13°
Q –128
3.00
5.60
13°
Q –133
3.35
6.20
13°
Q –138
3 50
6 60
13°
Q –155
3.90
6.81
13°